Crimpmaster™ Tool with CATV-F Die Set
Product Description
- Crimpmaster™ tool plus die set for RG-59/6/6 Quad F-Type crimp connectors
- 3 cavity hex die: 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Use with IDEAL Crimp-on F connectors
- Includes the 30-506 Crimpmaster™ frame
- Die set also available individually (see part number 30-582)
- F-type CATV RG-59, RG-6 Connectors
- Hex, 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Die set only for RG-59/6/6 Quad F-Type crimp connectors
- 3 cavity hex die: , 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Use with IDEAL Crimp-on F connectors
The Crimpmaster™ ratcheting crimp tool is a versatile hand held tool that uses interchangeable die sets to crimp many types of connectors including RF, wire terminals, and modular plugs. 15+ die sets are available for the Crimpmaster.
The tool is designed for heavy daily professional use. The thick walled frame is manufactured from fine blanked high carbon steel with a black oxide coating. Large contoured, rounded edge handles provide comfort and leverage during the crimping process.
The Crimpmaster has a ratchet mechanism which prevents the user from under crimping a connector. The tool will not open, or release the connector being crimped until a full crimping cycle has been completed. The tool does have a ratchet release lever located between the handles to open the tool if a full cycle cannot be completed.
The tool can be fine adjusted to die set variations with the 6 position cam wheel. Precision ground die sets can be changed with a flat or philips screwdriver. The Crimpmaster is a professional grade, general purpose crimping tool that requires no factory calibration.
- Heavy duty professional hand held ratcheting crimp tool
- Compatible with over 15 different die sets for RF connectors, wire terminals and modular plugs
- Provides a consistent crimp every time • Comfort grip contoured handles
- Dies change quickly with a screwdriver
- Adjustable cam for fine adjustments to the crimping cycle
- Crimpmaster™ tool plus die set for RG-59/6/6 Quad F-Type crimp connectors
- 3 cavity hex die: 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Use with IDEAL Crimp-on F connectors
- Includes the 30-506 Crimpmaster™ frame
- Die set also available individually (see part number 30-582)
- F-type CATV RG-59, RG-6 Connectors
- Hex, 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Die set only for RG-59/6/6 Quad F-Type crimp connectors
- 3 cavity hex die: , 0.350” (8.89mm), 0.320” (8.13mm), 0.255” (6.48mm)
- Use with IDEAL Crimp-on F connectors
The Crimpmaster™ ratcheting crimp tool is a versatile hand held tool that uses interchangeable die sets to crimp many types of connectors including RF, wire terminals, and modular plugs. 15+ die sets are available for the Crimpmaster.
The tool is designed for heavy daily professional use. The thick walled frame is manufactured from fine blanked high carbon steel with a black oxide coating. Large contoured, rounded edge handles provide comfort and leverage during the crimping process.
The Crimpmaster has a ratchet mechanism which prevents the user from under crimping a connector. The tool will not open, or release the connector being crimped until a full crimping cycle has been completed. The tool does have a ratchet release lever located between the handles to open the tool if a full cycle cannot be completed.
The tool can be fine adjusted to die set variations with the 6 position cam wheel. Precision ground die sets can be changed with a flat or philips screwdriver. The Crimpmaster is a professional grade, general purpose crimping tool that requires no factory calibration.
- Heavy duty professional hand held ratcheting crimp tool
- Compatible with over 15 different die sets for RF connectors, wire terminals and modular plugs
- Provides a consistent crimp every time • Comfort grip contoured handles
- Dies change quickly with a screwdriver
- Adjustable cam for fine adjustments to the crimping cycle
| Multi Function | Crimp and Compress |
